To order ANGK-pump units contact R&PC ANOD tel/fax:+7 (831) 233-77-03, ext. 1-07, 1-48
PUMP UNITS DESIGNATION
ANGK pump units by Research & Production Centre “ANOD” are applied for transferring of oil, oil products, liquefied hydrocarbon gases and other fluids, as agreed.
Features of pump units:
- High efficiency.
- Pressure casings by foreign manufacturers.
- Pump units are furnished with high-reliability sealing complex by R&PC ANOD.
- Due to original bearing support, pump units are able to operate at low temperatures without cooling in free-running mode.
- Furnished with up-to-date plate couplings.
- Equipped with block inspection sensor.
- Russian or foreign electromotors.
DECODING OF PUMP UNIT DESIGNATION
|Pump unit series||v|
|Pump type size||v|
|Nominal capacity, m3/h||v|
|Head (at nominal capacity), m||v|
|Version of impeller turning||v|
|Mechanical seal type||v|
|Type of climatic version||v|
PUMP UNIT SERIES
|Pn, bar||50||50||16||10;16||45||100||16, 25, 40, 50|
|T, °С, not lower than||-40||200||-40||-40||-400||-10||-40|
|T, °С, not higher than||200||400||180||180||400||120||400|
|Material||carbon steell||12X18H10T steell||12X17H13M2T steel||Special material|
EXAMPLE OF PUMP UNIT DESIGNATION
Overhung pump unit of Series 1, type size 6, with capacity of 30 m3/h and 130 m head, furnished with mechanical seal of 30UTD type, motor power – 30 kW, material — carbon steel, type of climatic version – U2.